For those who want and need the very best, GILLETTE GENERATORS give you an all USA made, heavy duty generator with (6) exclusive features

 

  • EXCLUSIVE "KLEEN-POWER" design allows only 7% harmonic distortion of the generated power sine-wave, on 2-pole, 3600 RPM sets; 3-4% distortion on all 4-pole, 1800 RPM sets. Harmful harmonic distortions over 10% may do damage to your plugged-in electric load.

  • EXCLUSIVE "POWER-ASSIST" design allows 35% more copper wire and electrical grade steel laminations than leading competitor 2 pole, 3600 RPM gen-sets.  This gives you huge (50% surge over rated kw), extra starting power for hard starting electrical motors.  An additional 10 - 12% more copper and steel laminations are found on the 4 pole, 1800 RPM design, allowing 15-18% more induction load starting power.

  • EXCLUSIVE HEAVY DUTY DIODES gives you a "life time warranty" from failure on the most frequently replaced part on other brand gen-sets.  (7-12.5 kw generators)

  • EXCLUSIVE HEAVY-DUTY CAPACITOR gives you "Life-Time" warranty from failure on the second most commonly replaced part on other brand gen-sets.  (7-12.5 kw generators)

  • EXCLUSIVE, AUTOMATIC LOAD BALANCE eliminates load chatter and excessive vibration due to unbalanced electric loads.  

  • EXCLUSIVE, INSULATION DESIGN gives you superior insulation against un-wanted heat for a longer lasting winding.  

 

K2N SERIES GENERATOR ONLY by GILLETTE, is designed to be directly installed onto the pilot face and shaft of the prime mover.  It is important to know that prime mover taper shaft must match rotor taper shaft and generator casting pilot, in order to have a correct fit between these two items.  With these models, you design and create your own portable generator set, by using a gasoline or diesel engine and furnishing the receptacle panel and roll frame for a complete generator set.  See our accessory page for additional equipment for these models.

 

Previous

More Specs
Gillette Generators, Inc.
Copyright © 2004   All rights reserved.